Exide CMP 2100: A High-Frequency Battery Charger with LCD Display
Exide CMP 2100 Battery Charger Manual: Everything You Need to Know
If you are looking for a reliable, efficient and easy-to-use battery charger for your industrial or commercial applications, you might want to consider the Exide CMP 2100 battery charger. This high-frequency charger offers optimal charging performance while consuming less power and reducing operating costs. In this article, we will provide you with everything you need to know about the Exide CMP 2100 battery charger manual, including its features, specifications, safety precautions and troubleshooting tips.
exide cmp 2100 battery charger manual
Features of the Exide CMP 2100 Battery Charger
The Exide CMP 2100 battery charger is designed to charge lead-acid batteries of various types and capacities, such as flooded, gel, AGM and VRLA batteries. It has a wide input voltage range of 230VAC +/- 10%, and a selectable output voltage of 12V, 24V or 36V. It can deliver a maximum output current of 100A, depending on the battery size and type.
The Exide CMP 2100 battery charger uses a high-frequency switching technology that converts the AC input into a DC output with minimal losses and high efficiency. It also features a microprocessor-controlled charging algorithm that adapts to the battery condition and optimizes the charging process. The charger has four charging modes: bulk, absorption, float and equalization. The bulk mode provides a constant current to the battery until it reaches a preset voltage level. The absorption mode maintains the voltage level until the current drops to a preset value. The float mode keeps the battery at a lower voltage level to prevent overcharging. The equalization mode applies a higher voltage to balance the cells and remove sulfation.
The Exide CMP 2100 battery charger has a user-friendly LCD display that guides you through the charging operation and shows various information such as battery voltage, current, charge time, charge mode and error codes. It also has high-visibility LEDs that indicate the charge status at a glance. The charger has several safety features such as reverse polarity protection, short circuit protection, overvoltage protection, overtemperature protection and overcharge protection. The charger also has a pause function that allows you to interrupt the charging process and resume it later without losing the charge data.
Specifications of the Exide CMP 2100 Battery Charger
The following table summarizes the main specifications of the Exide CMP 2100 battery charger:
Input voltage230VAC +/- 10%
Input frequency45-66Hz
Input currentModel dependent - specified on charger rating plate
Output voltageSelectable - 12V, 24V or 36V
Output currentMaximum 100A (depending on battery size and type)
Charging algorithmMicroprocessor-controlled - four modes (bulk, absorption, float and equalization)
DisplayLCD - shows battery voltage, current, charge time, charge mode and error codes
LEDsGreen - charge complete; Amber - second stage charge; Red - fault / warning
Safety featuresReverse polarity protection; Short circuit protection; Overvoltage protection; Overtemperature protection; Overcharge protection
Dimensions (W x H x D)300 x 200 x 120 mm
Weight5 kg
CoolingFan cooled
Ambient temperature-10C to +40C
Ambient humidity5% to 95% RH (non-condensing)
CertificationsCE marked; EN61000-6-2:2001; EN61000-6-4:2001; EN60335-2-29:2004; EN60335-1:2002+A11:2004+A1:2004+A12:2006+A2:2006+A13:2008+A14:2010+A15:2011+A16:2013+A17:2015+A18:2017+A19:2020; EN55014-1:2017; EN55014-2:2015; EN50581:2012; RoHS compliant
Safety Precautions for the Exide CMP 2100 Battery Charger
The Exide CMP 2100 battery charger is a powerful device that can pose some hazards if not used properly. Therefore, it is important to follow these safety precautions before installing, charging and removing the battery:
Read and understand the instructions for use manual before using the charger.
Only use the charger for charging lead-acid batteries of suitable type and capacity.
Do not use the charger for any other purpose than charging batteries.
Do not expose the charger to rain, moisture, dust or corrosive substances.
Do not place the charger near heat sources or flammable materials.
Do not cover or obstruct the ventilation openings of the charger.
Do not open or modify the charger. There are no user-serviceable parts inside.
Do not touch any metal parts of the charger or the battery terminals when the charger is connected to mains power or to the battery.
Wear protective gloves and eye wear when handling batteries.
Avoid sparks or flames near batteries. Batteries can emit explosive gases during charging.
Avoid short-circuiting the battery terminals or connecting them incorrectly. This can cause damage to the battery or the charger.
Avoid overcharging or undercharging the battery. This can reduce its performance and lifespan.
Avoid dropping or damaging the battery. This can cause leakage or fire hazard.
If you notice any abnormality with the charger or the battery, such as smoke, smell, noise or heat, disconnect them immediately and contact your dealer or service center.
If you spill any electrolyte from the battery on your skin or clothes, wash it off with plenty of water. If you get any electrolyte in your eyes, rinse them with water and seek medical attention.
If you need to dispose of the charger or the battery, do so in accordance with local regulations. Do not throw them in regular trash bins.
Troubleshooting Tips for the Exide CMP 2100 Battery Charger
The Exide CMP 2100 battery charger is designed to operate reliably and efficiently under normal conditions. However, if you encounter any problem with the charger or the battery during charging, you can refer to these troubleshooting tips to identify and resolve
the issue:
Error code / symptomPossible cause / solution
F01 - Input Voltage Out Of Range
The input voltage is too high or too low for
the charger.
Check that you have selected
the correct input voltage on
the rating plate.
Check that your mains power
supply is stable and within
the specified range.
If the problem persists,
contact your dealer or service
center.
F02 - Output Voltage Out Of Range
The output voltage is too high or too low for
the battery.
Check that you have selected
the correct output voltage on
the rating plate.
Check that your battery is of
the suitable type and capacity
for the charger.
Check that your battery is not
damaged or sulfated.
If the problem persists,
contact your dealer or service
center.
F03 - Output Current Out Of Range
The output current is too high or too low for
the battery.
Check that your battery is of
the suitable type and capacity
for the charger.
Check that your battery is not
damaged or sulfated.
If the problem persists,
contact your dealer or service
center.
F04 - Overtime Condition
The battery will not accept a charge after
18 hours of continuous charging.
The battery may have internal damage.
Have your battery checked by
a qualified technician.
Replace your battery if necessary.
F05 - Overtemperature Condition
The charger or the battery has overheated.
Check that the charger is not
placed near heat sources or
flammable materials.
Check that the ventilation
openings of the charger are not
obstructed.
Check that the ambient
temperature is within the
specified range.
Check that the battery is not
damaged or sulfated.
Let the charger and the battery
cool down before resuming
the charging process.
F06 - Reverse Polarity
The battery terminals are connected incorrectly to the charger output.
Disconnect the charger from
the mains power and from the
battery.
Check that the positive (+) and
negative (-) terminals of the
battery are connected to the
corresponding terminals of the
charger output.
Reconnect the charger to the
mains power and to the battery.
F07 - Battery Disconnected
The battery has been disconnected from the charger output during charging.
Reconnect the battery to the
charger output.
Press the reset button on the
charger to resume the charging
process.
F08 - Output Short Circuit
The charger output has been short-circuited.
Disconnect the charger from
the mains power and from the
battery.
Check that there are no foreign
objects or loose wires on the
charger output or on the battery
terminals.
Reconnect the charger to the
mains power and to the battery.
F09 - Communication Error
The communication between the charger and the battery has failed.
This error may occur if you are using a smart battery with a communication interface.
Disconnect the charger from
the mains power and from the
battery.
Check that the communication cable is properly connected and not damaged.
Reconnect the charger to the mains power and to the battery.
No display / No LEDs
The charger is not receiving power or has an internal fault.
Check that the mains power supply is stable and within the specified range.
Check that the input plug and cable are properly connected and not damaged.
Check that the input fuse is not blown and replace it if necessary.
If none of these steps solve
the problem, contact your dealer or service center.
Battery does not charge / Charges slowly
The battery is damaged, sulfated or incompatible with the charger.
Have your battery checked by a qualified technician.
Replace your battery if necessary.
Conclusion
The Exide CMP 2100 battery charger is a high-quality device that can charge your lead-acid batteries efficiently and safely. It has a user-friendly LCD display, high-visibility LEDs, various safety features and a pause function. It also uses a high-frequency switching technology and a microprocessor-controlled charging algorithm that optimize the charging performance. To use this charger properly, you need to follow the instructions for use manual carefully and observe the safety precautions at all times. You also need to check your battery condition regularly and troubleshoot any problem that may occur with your charger or your battery. By doing so, you can extend your battery lifespan and enjoy its optimal performance.
Conclusion
The Exide CMP 2100 battery charger is a high-quality device that can charge your lead-acid batteries efficiently and safely. It has a user-friendly LCD display, high-visibility LEDs, various safety features and a pause function. It also uses a high-frequency switching technology and a microprocessor-controlled charging algorithm that optimize the charging performance. To use this charger properly, you need to follow the instructions for use manual carefully and observe the safety precautions at all times. You also need to check your battery condition regularly and troubleshoot any problem that may occur with your charger or your battery. By doing so, you can extend your battery lifespan and enjoy its optimal performance. ca3e7ad8fd